Projects

Pillows

Created By: Michele Mishler
Skill Level: Advanced

Sewn on the Horizon Memory Craft 8900 QCP.

Samples Designed by Michele Mishler.

Janome Supplies Required

Janome Supplies Required For Pillow 1:

  • A Foot
  • Zipper Foot

Janome Supplies Required For Pillow 2:

  • A Foot
  • F Foot
  • Buttonhole Foot

Janome Supplies Required for Pillow 3:

  • A Foot
  • F Foot
  • Buttonhole Foot
Fabric and Notions Required

Fabric and Notions Required for Pillow 1:

  • Cotton print fabric, 5/8 yd
  • Contrast fabric, 3/8 yd
  • 1/4" cording, 2 1/2 yd
  • 20" down pillow form
  • All purpose thread

Fabric and Notions Required for Pillow 2:

  • Grey linen fabric, 5/8 yd
  • Fabric for applique, two 5" squares, one light value, one dark value
  • 20" down pillow form
  • 40 wt embroidery thread
  • Bobbin thread
  • All purpose thread
  • Stabilizer, wide roll
  • 5/8" buttons, 3
  • Template plastic
  • Wash away marking pen

Fabric and Notions Required for Pillow 3:

  • Gold linen fabric, 1/2 yd
  • Contrast fabric, scraps from Pillow 1
  • 12" x 16" pillow form
  • 40 wt embroidery thread
  • Bobbin thread
  • All purpose thread
  • Stabilizer
  • 5/8" buttons, 3
  • 1/2' bias tape maker
Instructions

Instructions For Pillow 1:

• From the print fabric, cut two 20" squares. From the contrast fabric, cut enough 1 1/2" bias strips to make a 90" length.
• Cover the cording with the bias strip. With the zipper foot, sew close to the cording, keeping the edges of the fabric even.
• Sew the cording to one of the 20" squares, with the zipper foot against the cording. Start and stop at a corner, overlapping the cording. Clip at each corner as you sew.
• Match the 20" square with cording to the remaining square with right sides together. Pin in place, matching the edges. Sew along the previous line of stitching, leaving a 6" opening.
• Trim corners and turn the pillow right sides out. Insert the down pillow form, making sure to fill out each corner.
• Hand sew the opening closed.
 

Instructions For Pillow 2:

• From the linen fabric, cut one 20" square and two 12 1/2" x 20" rectangles.
• Print templates for the 5 1/2" circle, 4 1/2" circle and 3 1/4" circle. Trace the templates onto template plastic. Cut out each template.
• Using the template for a 4 1/2" circle, trace a circle onto the wrong side of the light value fabric. Cut out the circle, adding a 1/4" seam allowance to the edge. Turn under the edge of the circle and press.
• Using the template for a 3 1/4" circle, trace a circle onto the wrong side of the dark value fabric. Cut out the circle, adding a 1/4" seam allowance to the edge. Turn under the edge of the circle and press.
• Arrange the circles in a group on the 20" square. Pin in place.
• Using the template for the 5 1/2" circle, trace an additional circle to complete group, overlapping a fabric circle.
• Thread the machine with bobbin thread in the bobbin and decorative thread in the needle. Cut a square of stabilizer to back the pillow top.
• Select a decorative stitch. Lift the edge of the overlapping fabric circle, and start the stitching under the edge. Sew along the marked line, around the circle to the opposite overlapped edge. Lift the edge and end the stitching under the overlapping fabric circle.
• Add additional rows of triple straight stitch to the circle, using the edge of the foot for spacing the rows. Start and stop under the edge of the overlapping fabric circle.
• Applique the large circle in place using a favorite decorative stitch.
• Applique the small fabric circle in place using another decorative stitch.
• Trim threads and remove the excess stabilizer.
• Press the completed pillow top from the wrong side.
• Fold and press a 1" double hem on the 20" side of each 12 1/2" x 20" rectangle. Edge stitch along both sides of the hem.
• On one double hem, mark the hem for three buttonholes, spaced 4" apart. Sew the buttonholes.
• Overlap the hems of the two pieces, matching the ends. Baste in place within the 1/2" seam allowance. This makes the pillow back.
• Place the pillow pack over the pillow front with right sides together, matching edges. Pin. Sew around the pillow with a 1/2" seam. Trim corners and turn the pillow right sides out. Press.
• Sew the buttons under each buttonhole.
• Insert the down pillow form into the completed pillow.


Instructions For Pillow 3:

• From the gold linen, cut a 13" x 39" rectangle of fabric. From the contrast fabric, cut 1" bias strips to make a length of 40"
• On each end of the gold linen, fold and press a 1" double hem. Edge stitch both sides of the hem.
• Mark one hem for three buttonholes, spaced 3" apart. Sew the buttonholes.
• Fold and press a crease 10" from one end. Make a second crease 12" from the end, a third crease 14" from the end and a fourth crease 16" from the end.
• Fold the fabric at the first crease and sew along the fold with a 1/4" seam. Make three more tucks in the same manner. Press the tucks to one side.
• Using the 1/2" bias tape maker, make a length of bias tape.
• Center a strip of bias tape between the first two tucks. Pin in place. Center a strip of bias tape between the second and third tuck, and another bias strip between th4e third and fourth tuck. Pin in place.
• Back the tucks with stabilizer. Thread the machine with bobbin thread in the bobbin and decorative thread in the needle. Select an appliqué stitch.
• Sew a row of appliqué stitches along each side of the bias strips.
• Fold the linen fabric so that the hems overlap and the fabric is right sides together. Double check that the hem with buttonholes is below the plain hem. Adjust the folds so that the hems are centered. Pin in place and sew across the upper and lower edges with a 1/2" seam. Turn the pillow right sides out.
• Mark the placement for the buttons directly below the buttonholes. Sew in place.
• Insert the pillow form to complete the pillow.
 


 

Everyone is Talking about Pillows
Reviews


Tako
Beautiful
Wednesday, November 23, 2016

cpindzola
Around the Table Dresden Placemats
Saturday, December 17, 2016

I like the concept, but the directions are "sloppy." Nowhere in the supply list does it mention the felt or the batting (how much?). Also, I would never use a high loft batting in a placemat, or a table runner, as I think that it would be too unstable for a glass. The next time I make these, I will cut out the batting (I use flannel) and spray baste it to the wrong side of the Dresden plate before I put the Dresden plate on the felt to cut out. I have not yet washed the finished placemat, and am hoping that the single layer of felt does not curl up, or become distorted after washing/drying.
Txmaid
Fun Great Gift!
Tuesday, February 21, 2017

MargieARK
Teatime Quilted Tablecloth
Friday, February 24, 2017

I made this today but your cutting directions need to be changed. You only need 4 of color 1 and color 3 4.5 squares for the triangles. Also the inner border, you only need 2 cuts as WOF is long enough to cut each in half to fit the sides.
MickelSews
Great Machine
Wednesday, August 30, 2017

I've had this machine for only a week now. I bought it used from a lady who makes her own clothes, but she no longer needed the machine. During the purchase, she noted that she is almost sad that it's better to give it away because of how well the machine performed. (I also bought it along side a computerized machine of another brand.} She demoed the machine for us, showing it worked and gave us everything (including the box it came in!) She took amazing care of this machine. I have used it a few times now, and the directions for threading were easy to follow (albeit my hands are quite large so the lower looper was a pain, but that is no fault to the machine or brand.) And I recommend this machine to anyone who wants to learn to serge and wants a machine that can grow with them. I will happily use this machine time and time again.
rvstan
S9 Review
Sunday, February 25, 2018

I love, love, love my S9! It's sews and embroiders beautifully and it's simplicity of use amazes me. I would recommend this machine for both a beginner and an experienced seamstress. If I would ask anything of Janome it would be to upgrade the programming to run a larger hoop size. I understand that it can't get much wider but there is most definitely room for it to go longer. That is the only limitation of this machine.
pjmnana
PJMNana
Monday, February 26, 2018

I purchased a Memorycraft 15000 a few years ago and it was the best purchase I ever made! This machine can do just about anything you would would ever want! I love the capability of using the Acuedit app to set up my embroidery pattern on my Ipad and then download it to the machine! I love how my embroidery looks upon completion and I love all the good lighting it has to light up your workspace. That way you don’t need to worry about where to set up your machine. It also has plenty of room to do machine embroidery on any size quilts! There are many decorative stitches from which to choose that are outstanding! It’s hard to choose which one to use! There are so many great features it is hard to decide what I love the most. If you want to buy only one machine to last a lifetime, I would recommend this one!

DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 130 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 Luanne Drive , Gaithersburg Maryland, 20877
(301)527-0598
www.capitalquilts.com
Find Additional Dealers