Projects

Descending Zig Zag Quilt

Created By:

Maureen Cracknell

Skill Level: Advanced

This project tutorial is for a descending zig zag pattern quilt, made by separating darker value fabrics from lighter ones to reveal a fantastic design! Quilt blocks sew up quick to an 8.5" unfinished square, a wonderful size for making both small and large quilts! Maureen Cracknell of Maureen Cracknell Homemade brings us this beautiful quilt!
 

Janome Supplies Required
  • Janome Sewing Machine - Maureen uses the Horizon Memory Craft 12000
Fabric and Notions Required

Fabric and Materials Required : :

  • a variety of fat quarters ( I used 10 dark value fabric & 10 light value fabric for a 30 block, 40" x 48" finished quilt)
  • batting
  • thread
  • rotary cutter/mat/ruler set
  • quilt backing and binding fabric

Notes on Value : I chose the Nordika Fabric Collection by Jeni Baker for Art Gallery Fabrics, along with a few coordinating Pure Element solids. Feel free to replace these suggested fabrics with fabrics in colors and prints to your own liking, just as long as you use an even mix of dark and light value fabrics.


Not sure if your fabric has a dark or light value? Separate your fabrics into two piles, one for light, one for dark, and then take a photo. Changing that photo to black and white quickly reveals each fabric value. Use this as a way to separate those dark and light fabrics properly.

 

 

Instructions

Instructions:

1. Begin by choosing one dark value and one light value fabric. Cut 1 - 3" x 18" strip from the dark fabric. Cut 1 - 2" x 18" strip from the light fabric



2. Place fabrics right sides together and pin along one long side. Sew using a 1/4" seam allowance along that edge, removing pins as you go. Press the seam open with an iron



3. From that strip use a rotary cutter to cut four - 4.5" patches



4. Arrange those patches in the layout shown below in the photo on the left. Using a 1/4" seam allowance, sew together the top two patches to make a rectangle, then the bottom two patches to make a rectangle



5. Keeping the 1/4" seam allowance, sew the top and bottom rectangles together to make a 8.5" square block



6. Continue making blocks using those same instructions, separating color values as you go






7. Sew together the 8.5" quilt blocks. Baste the quilt top to the quilt batting and quilt backing. Add the quilting. I chose to quilt lines following the zig zag pattern









8. Finish with binding and you're Descending Zig Zag Quilt it finished!



Everyone is Talking about Descending Zig Zag Quilt
Reviews


Tako
Beautiful
Wednesday, November 23, 2016

cpindzola
Around the Table Dresden Placemats
Saturday, December 17, 2016

I like the concept, but the directions are "sloppy." Nowhere in the supply list does it mention the felt or the batting (how much?). Also, I would never use a high loft batting in a placemat, or a table runner, as I think that it would be too unstable for a glass. The next time I make these, I will cut out the batting (I use flannel) and spray baste it to the wrong side of the Dresden plate before I put the Dresden plate on the felt to cut out. I have not yet washed the finished placemat, and am hoping that the single layer of felt does not curl up, or become distorted after washing/drying.
Txmaid
Fun Great Gift!
Tuesday, February 21, 2017

MargieARK
Teatime Quilted Tablecloth
Friday, February 24, 2017

I made this today but your cutting directions need to be changed. You only need 4 of color 1 and color 3 4.5 squares for the triangles. Also the inner border, you only need 2 cuts as WOF is long enough to cut each in half to fit the sides.
MickelSews
Great Machine
Wednesday, August 30, 2017

I've had this machine for only a week now. I bought it used from a lady who makes her own clothes, but she no longer needed the machine. During the purchase, she noted that she is almost sad that it's better to give it away because of how well the machine performed. (I also bought it along side a computerized machine of another brand.} She demoed the machine for us, showing it worked and gave us everything (including the box it came in!) She took amazing care of this machine. I have used it a few times now, and the directions for threading were easy to follow (albeit my hands are quite large so the lower looper was a pain, but that is no fault to the machine or brand.) And I recommend this machine to anyone who wants to learn to serge and wants a machine that can grow with them. I will happily use this machine time and time again.
rvstan
S9 Review
Sunday, February 25, 2018

I love, love, love my S9! It's sews and embroiders beautifully and it's simplicity of use amazes me. I would recommend this machine for both a beginner and an experienced seamstress. If I would ask anything of Janome it would be to upgrade the programming to run a larger hoop size. I understand that it can't get much wider but there is most definitely room for it to go longer. That is the only limitation of this machine.
pjmnana
PJMNana
Monday, February 26, 2018

I purchased a Memorycraft 15000 a few years ago and it was the best purchase I ever made! This machine can do just about anything you would would ever want! I love the capability of using the Acuedit app to set up my embroidery pattern on my Ipad and then download it to the machine! I love how my embroidery looks upon completion and I love all the good lighting it has to light up your workspace. That way you don’t need to worry about where to set up your machine. It also has plenty of room to do machine embroidery on any size quilts! There are many decorative stitches from which to choose that are outstanding! It’s hard to choose which one to use! There are so many great features it is hard to decide what I love the most. If you want to buy only one machine to last a lifetime, I would recommend this one!

DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 130 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 Luanne Drive , Gaithersburg Maryland, 20877
(301)527-0598
www.capitalquilts.com
Find Additional Dealers