Forum Home | Crafting


Tiffany Scott
By: Tiffany Scott
Posts: 1
Fabric Not Feeding Through in Decorative stitch
I have a Magnolia 7330 my fabric will not feed through properly with decorative stitches, all of the fabric bunches under the plate, I have tried adjusting the tensions, changing the fabric I was sewing, and even changing the type of thread, nothing I am doing is working.

  1. RE: Fabric Not Feeding Through in Decorative stitch

    This can occur if the fabric is lightweight and then the stitches will bunch up. Try a 75/11 needle, spray starch on the fabric and strips of tear-away or medium weight water soluble stabilizer. Before you start, remove the bobbin race and give the machine a thorough cleaning. Be sure to let us know if you find a solution for the benefit of other Forum readers.
    Posted: Mar 22 2017 By: devilcat
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD Suite 130-135, ASHBURN VA, 20147
15926 Luanne Drive , Gaithersburg MD, 20877
Find Additional Dealers