Forum Home | Embroidery

Topic

Junegem
By: Junegem
Posts: 1
RE18 for 14000
Hi all - I have the RE18 hoop which is supposed to work with my MC14000; however, my machine is not recognizing any of the files on the Janome USB which came with the hoop. Any one have any ideas on how to install it on my 14000? I've gone into the hoops selection on the machine and it's not there.

I appreciate your insights or suggestions.

Thank you - Terry
Replies

  1. RE: RE18 for 14000

    You might need to do an update for you machine to use that hoop. Check on the Janome Global site for software updates for you machine. DO NOT try to update you machine with anything other than that for the 14000 or you might interfere with the programming in your sewing machine - that wouldn't make you happy.

    Cheryl
    Posted: Jan 08 2020 By: CherylAnn
DEALERS
The TWO Closest Dealers to you are:
11925 SW FREEWAY SUITE11, STAFFORD TX, 77477
281-491-0016
829 S. MASON ROAD , KATY TX, 77450
281.398.0670
WWW.QUILTNSEW.COM
Find Additional Dealers