Forum Home | Techniques

Topic

StitchyMcBitchy
By: StitchyMcBitchy
Posts: 1
Atelier 5 needleplate problem
I’m getting the ‘needleplate missing/wrong needleplate’ error coming up although I’ve changed nothing from standard straight stitch settings. Cleaned out fluff, took needleplate off a couple of times. No joy. Needle won’t drop into material but if I do it by hand and run a couple of stitches, they look fine. Any ideas?!
Replies

  1. RE: Atelier 5 needleplate problem

    It sounds like there might be a sensor problem. This will require a trip to your dealer to have checked out. You've tried to fix by removing the needle plate and cleaning out the bottom area, so I'd guess this is the problem. Electronics do fail at times when we most want them to be perfect.

    Cheryl
    Posted: Jul 02 2020 By: CherylAnn
DEALERS
The TWO Closest Dealers to you are:
11925 SW FREEWAY SUITE11, STAFFORD TX, 77477
281-491-0016
829 S. MASON ROAD , KATY TX, 77450
281.398.0670
WWW.QUILTNSEW.COM
Find Additional Dealers