Adhesive Vinyl Starter Kit
Part Number: ARTVINYLSTARTKIT
The Artistic Adhesive Vinyl Starter Kit contains everything you need to start embellishing with your new software. With Artistic, adding vinyl to any project is simple. 4 Sheets 12″x12″ Adhesive Vinyl – one each of pink, black, blue, white 4 Pieces 12″x12″ Transfer Tape 1 Artistic Squeegee 1 Artistic Hook 1 X-Acto Knife
Heat Transfer Vinyl Starter Kit
Part Number: ARTHEATSTARTKIT
The Artistic Heat Transfer Vinyl Starter Kit contains everything you need to start embellishing with your new software. With Artistic, adding vinyl to any project is simple. 5 Sheets 12″x12″ heat transfer vinyl – one each of black, white, indigo, metallic gold, metallic silver1 Artistic Squeegee1 Artistic Hook1 X-Acto Knife
Standard Cutting mat 12″ x 12″
Part Number: EDGESDCUT12
The low tack mat is ideal for cutting more delicate materials in the Artistic Edge that may be ruined by too much adhesive. This mat is perfect for craft paper and thin fabrics. One comes standard with the machine.
High Tack Cutting Mat 12″ x 12″
Part Number: EDGEHTCUT12
The high tack cutting mats are ideal for cutting thicker materials in the Artistic Edge that could shift or curl. The mat is perfect for template materials, invyl from a roll, or foam board. This size comes standard with the machine.
High Tack Cutting mat 12″ x 24
Part Number: EDGEHTCUT24
The high tack cutting mats are ideal for cutting thicker materials in the Artistic Edge that could shift or curl. The mat is perfect for template materials, invyl from a roll, or foam board. This longer length is an optional accessory
Standard Blade Holder
Part Number: EDGESDBLADE
Enjoy the ability to fine tune blade height with an industrial deisgn. Fits all Artistic Blades. (Same as what comes on the machine)
Red Cap Blade Set
Part Number: EDGEREDBLADE
Red Cap (standard blade) for thinner materials such as vinyl, paper, or stickers.
Yellow Cap Blade Set
Part Number: EDGEYELBLADE
Yellow Cap (Fabric Blade) for fabric
Blue Cap Blade Set
Part Number: EDGEBLUEBLADE
Blue Cap (Thick Blade) for thicker materials like sandblast, rhinestone templates, and thick foam.
Combo Pack Blade Set
Part Number: EDGECOMBOBLADE
Contains one of each Red, Yellow, and Blue Blade (one package comes with the machine)
Pen Holder
Part Number: EDGEPENHOLDER
Drop a pen or marker in to turn your digital cutter into a digital illustrator. Use included screw in the pen holder to keep your pen secure while in use.
Punching Tool
Part Number: EDGEPUNCH
The punching tool is useful for punching holes into thin, smooth, paper, cardstock, vellum and foil.
Grinding Tool
Part Number: EDGEGRIND
Create the look of frosted or engraved glass with the grinding tool. The texture will be ground into plexi-glass or plastic material.
Etching / Engraving Tool
Part Number: EDGEETCH
The diamond tip on this tool is perfect for engraving projects in vellum, foil, and acrylic. It will also etch most metals.
Creasing Tool
Part Number: EDGECREASE
Use the creasing tool to break fibers in heavy card stock so that you can easily fold for making boxes or 3-D shapes. Can also be used for embossing with a round tip.
EZ Snips
Part Number: ARTSNIPS
Just like Janome EZ snips. Small scissors for cutting jump threads, etc
Edge Hook
Part Number: EDGEHOOK
An essential tool for anyone. Use the hook to pull back leftover materials from your project or for removing small pieces of negative space leftover from you cut.
Edge Scraper
Part Number: EDGESCRAPER
Easily remove leftover materials from your digital cutting mat in seconds. The scraper is designed to allow you to remove the extra fabric, paper or template left on the mat after cutting your project.
Edge Squeegee
Part Number: EDGESQUEEGEE
This soft plastic squeegee will come in handy for a variety of applications. Use it to adhere vinyl to transfer tape and final projects, clean your cutting mats, or smooth air bubbles.
Tweezers
Part Number: ARTTWEEZE
4.5″ angle tip tweezers – for placing rhinestones.