Forum Home | Serging

Topic

gggypsy
By: gggypsy
Posts: 2
Rolled Hem is NOT rolled
Hello fellow sewers! I have a 3434d serger and I set up the serger as the instruction manual says to for a rolled hem, but when I serg, the hem isn't rolling over - it's staying like a standard stitch. And YES I have it set to R on both the tension knob and foot plate and have adjusted all my other tension knobs as recommended. So why won't my hem roll?
Replies

  1. RE: Rolled Hem is NOT rolled

    You may need to adjust the tensions a bit at a time to see if that helps. Also thread the machine with different coloured threads so you can see which thread is causing the grief. If that fails, you should contact your dealer for some hands on help.

    Cheryl
    Posted: May 16 2017 By: CherylAnn
  2. RE: Rolled Hem is NOT rolled

    Thank you Cheryl! I'll give it a try!
    Posted: May 17 2017 By: gggypsy
DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 130 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 LUANNE DR , GAITHERSBURG MD, 20877
301-527-0598
www.capitalquilts.com
Find Additional Dealers