Wine Glass Flip Flops
Projects

Wine Glass Flip Flops

Created By: Amy Meek
Skill Level: Beginner
Patterns Available +/-
Template for Flip Flop Coasters

These coasters make up fast and easy and can be embroidered or decorated as you choose. They would make a great hostess gift or party favor and would identify stemmed classes for party goers!!!

Janome Supplies Required

Janome Supplies Required
Any Janome Sewing Machine
F foot or Ultra Glide Foot
 

Fabric and Notions Required

Fabric and Notions Required
An Iron or Press
Supplies Needed
¼ yard of four fabrics or at least a 5 inch by 5 inch square of fabric
¼ yard ultra -heavy craft interfacing such as Timtex iron on
¼ yard Heat N Bond
¼ yard rubberized shelf paper
4 – 6 inch pieces of ¼ inch elastic
 

Instructions

1. Cut fabric into 5” squares.
2. Using the template supplied cut 4 bases of interfacing, Heat N Bond and shelf paper.
3. Adhere the 5” square piece of fabric to the iron-on side (after removing the film) of the interfacing, pressing the fabrics wrong side to the iron-on side of the interfacing.
4. Trim the fabric to the shape of the interfacing with enough extra fabric to fold over the edge of the interfacing.
5. Press the raw edges to the white side of interfacing (it will stick when pressed).
6. Using the mark on the template, secure the center of the elastic to the top of the Flip Flop by straight stitching it along the width of the fabric, reverse over your stitching and stitch again.
7. Stretch elastic to side mark and stitch in place following the same method.
8. Fold raw edge of elastic under the flip flop.
9. Press the Heat N Bond to the bottom of the Flip Flop. Remove paper and center shelf paper on Heat N Bond.
10. Press from fabric side of flip flop (you could also glue this on if you don’t wish to use Heat and Bond).
 

Everyone is Talking about Wine Glass Flip Flops
Reviews


Tako
Beautiful
Wednesday, November 23, 2016

cpindzola
Around the Table Dresden Placemats
Saturday, December 17, 2016

I like the concept, but the directions are "sloppy." Nowhere in the supply list does it mention the felt or the batting (how much?). Also, I would never use a high loft batting in a placemat, or a table runner, as I think that it would be too unstable for a glass. The next time I make these, I will cut out the batting (I use flannel) and spray baste it to the wrong side of the Dresden plate before I put the Dresden plate on the felt to cut out. I have not yet washed the finished placemat, and am hoping that the single layer of felt does not curl up, or become distorted after washing/drying.
Txmaid
Fun Great Gift!
Tuesday, February 21, 2017

MargieARK
Teatime Quilted Tablecloth
Friday, February 24, 2017

I made this today but your cutting directions need to be changed. You only need 4 of color 1 and color 3 4.5 squares for the triangles. Also the inner border, you only need 2 cuts as WOF is long enough to cut each in half to fit the sides.
MickelSews
Great Machine
Wednesday, August 30, 2017

I've had this machine for only a week now. I bought it used from a lady who makes her own clothes, but she no longer needed the machine. During the purchase, she noted that she is almost sad that it's better to give it away because of how well the machine performed. (I also bought it along side a computerized machine of another brand.} She demoed the machine for us, showing it worked and gave us everything (including the box it came in!) She took amazing care of this machine. I have used it a few times now, and the directions for threading were easy to follow (albeit my hands are quite large so the lower looper was a pain, but that is no fault to the machine or brand.) And I recommend this machine to anyone who wants to learn to serge and wants a machine that can grow with them. I will happily use this machine time and time again.
rvstan
S9 Review
Sunday, February 25, 2018

I love, love, love my S9! It's sews and embroiders beautifully and it's simplicity of use amazes me. I would recommend this machine for both a beginner and an experienced seamstress. If I would ask anything of Janome it would be to upgrade the programming to run a larger hoop size. I understand that it can't get much wider but there is most definitely room for it to go longer. That is the only limitation of this machine.
pjmnana
PJMNana
Monday, February 26, 2018

I purchased a Memorycraft 15000 a few years ago and it was the best purchase I ever made! This machine can do just about anything you would would ever want! I love the capability of using the Acuedit app to set up my embroidery pattern on my Ipad and then download it to the machine! I love how my embroidery looks upon completion and I love all the good lighting it has to light up your workspace. That way you don’t need to worry about where to set up your machine. It also has plenty of room to do machine embroidery on any size quilts! There are many decorative stitches from which to choose that are outstanding! It’s hard to choose which one to use! There are so many great features it is hard to decide what I love the most. If you want to buy only one machine to last a lifetime, I would recommend this one!

DEALERS
The TWO Closest Dealers to you are:
44933 GEORGE WASHINGTON BLVD, SUITE 130 , ASHBURN VA, 20147
http://www.ashburnsewing.com
15926 LUANNE DR , GAITHERSBURG MD, 20877
301-527-0598
www.capitalquilts.com
Find Additional Dealers